CarGO Tipper Trailer 526 3.6m x 2.0m 3500kg

Tipper

CarGO Tipper Trailer 526 3.6m x 2.0m 3500kg

$23,100 incl GST
Brian-James-Trailers-NZ
CarGO Tipper 3 brings real advances in all important areas in tipper trailer design. User operation is enhanced by a unique 270 degree hinged rear door set, a fastener-free deck area with steel lined and highly reinforced composite sub-structure as well as a unique new side extension system. The product range is all-electric operation. The range includes options and accessories allowing you to specify your tipper trailer to suit the job at hand. Every detail of the CarGO Tipper 3 has been given considerable attention, leading to the design being widely acclaimed as one of the very best in Europe.
Standard Equipment includes
-Click & Clamp system- Designed with auto-adjusting locking posts combined with clamp-down sides to ensure maximum rigidity and rattle-free towing.
-2-way tailgate 2-way tailgate allows easy switching between aggregate spreading and bulk tipping functions. Rear post load guides prevent aggregate build-up in corners during unloading.
-Heavy-duty drop sides- Strong steel 308mm sides, complete with removable headboard.
-Full LED lighting
-Reinforced deck- Reinforced, bonded phenol ply with steel-lined deck creates a tough, durable and obstruction-free surface.
-Lockable storage box
-Battery trickle Charge – charges from car ignition when engine is running (tow vehicle dependant). Battery status indicator located in storage locker.
-Safety stand for maintenance and repair.
-Spare Wheel -Stored under the chassis and accessible without having to tip load.
-Twin Rams on all 3.6 and above models.

KEY FEATURES

Code 526-3620-35-2-12
Axles 2
GVM 3500kg
Tare 1110kg
Payload 2390kg
Deck 3.60m x 2.00m
Deck height 0.71m
NZTA approved to 3500kg without In-cab brake controllers
Powerful mechanical over-ride brakes
AL-KO Independent rubber suspension axles
Sealed heavy duty wheel bearings
Reinforced heavy duty deck bed
Galvanised body and chassis
Low Load Height Deck
Fully removable steel drop down sides and headboards
Full width rear tailgate, top & bottom hinged
Flush internal anchor points
External underside rope hooks
12v Electric hydraulic operation with isolation key.
Storage box for control equipment
50mm Coupler (1&7/8 coupler available on request)
Multi-volt LED lights
H/D Jockey wheel
Spare wheel
NOTE: WOF & REG. Not included

Accessories

Rear Door Side Hinged Upgrade $340
Double-height Solid side extensions (308mm) Side height increased from 308mm to 616mm $2,800
Side extensions (660mm) side height increased from 308 to 968mm $3,040
Heavy-duty Solid side extensions (660mm)Side height increased from 660mm to 968mm $4,155
Ladder Rack (Tall) for dropsides $600
Ladder Rack for Extension sides $390
High Grip punched Ramp 1.80m $1,065
High Grip punched Ramp 2.30m $1,295
Rear Support Legs $520
Electric Winch, 4500lb $POA
Optional 1&7/8 coupler $275

Please enquiry about other accessories options available

Shipping Information

Contact your local dealer